|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Problem replacing GE DDG7189VTLAD w/ GE DVLR223GGWW |
Konnichiwa and Welcome!Please register or watch this short screencast on how to get started here.
|
| Moderated by: RegUS_PatOff, Pegi |
|
Page:   1 2 |
|
||||||||||||
| Problem replacing GE DDG7189VTLAD w/ GE DVLR223GGWW | Rate Topic |
| Author | Post |
|---|
| Posted: Mon Oct 19th, 2009 03:47 am |
|
21st Post |
|
K,man Sublime Master of Appliantology
|
the periscope the samurai recommended is the best for your application..they are also telescopic to adjust the length..
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Oct 19th, 2009 04:04 am |
|
22nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
Samurai Appliance Repair Man wrote: This may be a good application for the periscope vent:hhmmm.. same part, different views click on picture Periscopes to 18" with 2 1/2" wall clearance  click on picture Periscopes from 18" to 29" with 2 1/2" wall clearance  click on picture Periscopes from 29" to 50" with 2 1/2" wall clearance 
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Sun Oct 25th, 2009 02:51 am |
|
23rd Post |
|
stevem01 Apprentice Appliantologist 
|
I replaced the gas valve coils yesterday and it seems to be working just fine now. I just wanted to say thanks to everyone who helped.  Last edited on Sun Oct 25th, 2009 02:51 am by stevem01 |
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 4th, 2009 12:19 am |
|
24th Post |
|
stevem01 Apprentice Appliantologist
|
Ok, I have another problem now... Just before I replaced the gas coils and fixed that problem it was starting to make a sound that has been getting progressively louder and more frequent to the point that it's almost constantly making this sound whenever the dryer is running. It sounds like 'metallic creaking' as the tumbler rotates... like the bearings need replaced or something. I'm going to pull it out and see if I can pinpoint the source, but just from observation where it sits, it sounds like it's coming from behind the main tumbler drum. I looked it up and there is a bearing replacement kit available for it. Should I try that first? (I'll check repairclinic.com and see if they carry it or have it in stock).
|
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 4th, 2009 03:28 am |
|
25th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
stevem01 wrote: ... (I'll check repairclinic.com and see if they carry it or have it in stock)... click on picture 
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
||||||||||||||
| |||||||||||||||
| Current time is 10:57 pm | Page: 1 2 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Problem replacing GE DDG7189VTLAD w/ GE DVLR223GGWW | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home
