| Checking the continuity of the heating element circuit, it seems to be open under the tub. I have removed the heater element (3.5 on the suds-o-meter), and found a break in the heating trace. After much effort, I soldered a piece of copper wire across it, and reinstalled. The yellow gaskets seem to have stretched, and it is hard to get them in place. Sure enough, after reassembing, it is leaking from the heating element gasket. Should I get new gaskets to ensure a good seal, or have I missed a basic step? Last edited on Sat Jul 4th, 2009 12:09 am by dmayou
|
