 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 9067 |
| Status: |
Offline
|
Test devices while they're still connected, don't remove items to test (unless specified)
The Door Switch may be good when it's not mounted in the Dryer,
but if the Door Latch Mechanism isn't actuating the Switch, the Dryer won't work.
You'd have to test the Door Switch while it's still mounted in the machine ...
Motor only uses 120v...
I was looking at the Motor Wiring on the Diagram
I usualy test by Wire Color (not numbers)
There is a Switch on the Motor that controls the Heater, so that it only operates while the Drum Motor is turning...
but I wasn't concerend with that part of the circuit, and those wires don't connect to the Motor Winding,
nor would they prevent the Motor from running.
____________________
RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA
Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?"