|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > wcsr2070tbww won't agitate |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| wcsr2070tbww won't agitate | Rate Topic |
| Author | Post |
|---|
| Posted: Mon Nov 1st, 2010 02:55 pm |
|
1st Post |
|
Bushi#2 Senior Apprentice Appliantologist 
|
I am having trouble with my GE wcsr2070tbww it will not agitate. When the machine is running I can hear the motor running it's just not moving the agitator. Now, I have done extensive research on agitators and have broken a belt trying to remove this one. So it is with my last gasp of frustrated air that I come to you for help. What should I do next??
____________________ "You can have everything in life you want if you will just help enough other people get what they want." |
||||||||||||||
| |||||||||||||||
| Posted: Mon Nov 1st, 2010 09:01 pm |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Any flashing lights on the inverter board? Take a look at this post==> http://fixitnow.com/wp/2010/08/24/ge-hydro-wave-washer-spins-but-wont-agitate-and-led-on-inverter-board-blinks-four-times/
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Mon Nov 1st, 2010 10:56 pm |
|
3rd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
no LED on that motor .. Does the Spin Cycle work OK ?
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 6th, 2010 03:44 am |
|
4th Post |
|
Bushi#2 Senior Apprentice Appliantologist
|
Yes spin works fine I'll check out the lights.
____________________ "You can have everything in life you want if you will just help enough other people get what they want." |
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 6th, 2010 04:51 am |
|
5th Post |
|
Bushi#2 Senior Apprentice Appliantologist
|
Ok I opened the front cover and ran a cycle, there are no lights ( I don't think this is a Hydro) the motor and belt work fine in wash & spin. I can see that the shaft inside is turning during wash. Now my next steep is how do I get the darn agitator off. It won't pull off, I broke a belt using the belt and 2x4 method. When I remove the top of the agitator (fabric softener cup) there is a plastic cover but I can't seem to get it off. What's the next steep?? Thanks again for your help.
____________________ "You can have everything in life you want if you will just help enough other people get what they want." |
||||||||||||||
| |||||||||||||||
| Posted: Tue Nov 9th, 2010 05:25 pm |
|
6th Post |
|
Moostafa The Ayatollah of Appliantology 
|
Hello, my unagitated friend. Perhaps our effluvious host was partaking of a bit too much of my country's national product when he referred to inverter lights. You are correct, your model does not have an inverter. As for the agitator, you are struggling with the effects of an oxidation-reduction reaction generically referred to as "rust." The prescription is perseverance and perspiration.
____________________ Allahu Akbar! Moostafa |
|||||||||||||
| ||||||||||||||
| Posted: Tue Nov 9th, 2010 07:17 pm |
|
7th Post |
|
Bushi#2 Senior Apprentice Appliantologist
|
Ahh And Persue I will. (Bow)
____________________ "You can have everything in life you want if you will just help enough other people get what they want." |
||||||||||||||
| |||||||||||||||
| Posted: Sat Feb 19th, 2011 02:16 pm |
|
8th Post |
|
Bushi#2 Senior Apprentice Appliantologist
|
Just a follow up I pulled as hard as I could, got it off and replaced it. Thanks All
____________________ "You can have everything in life you want if you will just help enough other people get what they want." |
|||||||||||||
| ||||||||||||||
| Posted: Sat Feb 19th, 2011 03:03 pm |
|
9th Post |
|
Bushi#2 Senior Apprentice Appliantologist
|
Ok for some reason I cant start a new Topic so I will continue here. I have run into trouble with this machine again. My loving wife washed a body pillow and the "UL" shook the washer like nothing we've ever seen before. Causing the timer to break where the screw holds it in and shift so it wouldn't spin & just kept running. So I took off the panel an got the timer back to normal and started her up again. during the spin cycle again it went crazy and then completely stopped. Now when I run the mach. it fills and makes the noises like a normal cycle bit nothing turns, no agitation and no spin. when I get home I will try to spin it with out the belt but I wanted to ask for any trouble shooting tips before I give up on it.
____________________ "You can have everything in life you want if you will just help enough other people get what they want." |
||||||||||||||
| |||||||||||||||
Current time is 02:24 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > wcsr2070tbww won't agitate | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
