|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Whirlpool Imperial series 29" Gas Dryer MODEL # LGT7646AQ0 |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 |
|
|
|||||||||||||
| Whirlpool Imperial series 29" Gas Dryer MODEL # LGT7646AQ0 | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Sep 12th, 2009 07:58 pm |
|
1st Post |
|
JADE DRAGON Chief Apprentice Appliantologist
|
Am trying to remove the blower on this machine. I grab the motor shaft with a wrench and grab the stub of the blower with another wrench and attempt to turn the motor clockwise to loosen the blower, but the damn stub of the blower turns with the motor and won't keep still. Now the blower stub is getting stripped and I am not sure what to do.... 
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Sep 12th, 2009 09:45 pm |
|
2nd Post |
|
Moostafa The Ayatollah of Appliantology 
|
Hello, my stripped friend. Perhaps this picture will be of assistance:
____________________ Allahu Akbar! Moostafa |
|||||||||||||
| ||||||||||||||
| Posted: Sat Sep 12th, 2009 10:14 pm |
|
3rd Post |
|
NCSU_laundry_tech Sublime Master of Appliantology 
|
sometimes i have to use a hammer and chisel and destroy the blower wheel if it insists on rounding off
____________________ To alcohol! The cause of... and solution to... all of life's problems. Doc Watson - Shady Grove: http://www.youtube.com/watch?v=b-kaG1NuLZM riding my dirtbike in clayton NC: http://www.youtube.com/watch?v=NnCmY0vzmYM |
||||||||||||||
| |||||||||||||||
| Posted: Sun Sep 13th, 2009 12:03 am |
|
4th Post |
|
applianceman18007260692 Sublime Master of Appliantology 
|
I put a big ass pipe wrench inside to hold that motor still. I put a hammer Handle in between 2 fins at the 3 o'clock position. I slam down on the handle with a rubber mallet. That knocks em loose every time. Nice pic Moostaffer Last edited on Sun Sep 13th, 2009 12:04 am by applianceman18007260692 ____________________ "May the hinges of our friendship never grow rusty" Old Irish Saying |
|||||||||||||
| ||||||||||||||
| Posted: Sun Sep 13th, 2009 05:15 am |
|
5th Post |
|
JADE DRAGON Chief Apprentice Appliantologist
|
Very interesting, I wanna try that--but what do you mean you "put a hammer between two fins?" . And are you putting the big ass pipe wrench on the blower section that connects to the motor or on the outer motor shaft?
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Sep 13th, 2009 05:16 am |
|
6th Post |
|
JADE DRAGON Chief Apprentice Appliantologist
|
Thanks for the pic Moostafa. I will give it a try!
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Sep 13th, 2009 05:17 am |
|
7th Post |
|
JADE DRAGON Chief Apprentice Appliantologist
|
Wow. I hope it doesn't come to that...................
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Sep 15th, 2009 03:56 am |
|
8th Post |
|
JADE DRAGON Chief Apprentice Appliantologist
|
applianceman18007260692 wrote: I put a big ass pipe wrench inside to hold that motor still. I put a hammer Handle in between 2 fins at the 3 o'clock position. I slam down on the handle with a rubber mallet. That knocks em loose every time. Nice pic Moostaffer YES! It worked like a charm! Thanks applianceman18007260692!
|
|||||||||||||
| ||||||||||||||
| Current time is 03:23 pm | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Whirlpool Imperial series 29" Gas Dryer MODEL # LGT7646AQ0 | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com
