ApplianceGuru.com: The Samurai Appliance Repair Forums Home

FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Bosch washer WFMC2201UC

Konnichiwa and Welcome!

Please register or watch this short screencast on how to get started here.

SEARCH THIS SITE
We have a bizillion pages of specific appliance repair questions and answers here just aching for the furtive caress of your engorged and tingling eyeballs. Use this search box to find ‘em.

FIND PARTS FAST
Search by part number or model number. You can also search by appliance type, brand, or even the type of part.

 Moderated by: RegUS_PatOff, Pegi Tell a friend about this page... all your other friends are doing it!
New Topic Reply Printer Friendly
Bosch washer WFMC2201UC  Rate Topic 
AuthorPost
 Posted: Mon Jun 29th, 2009 01:58 pm
  PM Quote Reply
1st Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 I need help with this Bosch clothes washer model #WFM2201UC. The unit does not spin, and I

am looking for a service manual to help with diagnosing the problem. Thanks for your help, GG
Back To Top PM Quote Reply  

 Posted: Tue Jun 30th, 2009 01:28 am
  PM Quote Reply
2nd Post
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology


Joined: Sat Sep 24th, 2005
Location: Milwaukee, Wisconsin USA
Posts: 9067
Flavorite Brew: Indian Head. Black & White
Status: 
Offline
 Bosch manuals are hard to get.

I don't have a manual for the WFMC2201UC

I have one for the WFMC3200 / WFMC6400


 manual sent

Last edited on Tue Jun 30th, 2009 01:12 pm by RegUS_PatOff



____________________

RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw

my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA

Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
Back To Top PM Quote Reply

 Posted: Tue Jun 30th, 2009 11:38 am
  PM Quote Reply
3rd Post
NCSU_laundry_tech
Sublime Master of Appliantology


Joined: Mon Aug 18th, 2008
Location: Raleigh, North Carolina USA
Posts: 823
Flavorite Brew: The one in my hand
Status: 
Offline
 could be as simple as cleaning the pump



____________________
To alcohol! The cause of... and solution to... all of life's problems.

Doc Watson - Shady Grove: http://www.youtube.com/watch?v=b-kaG1NuLZM

riding my dirtbike in clayton NC: http://www.youtube.com/watch?v=NnCmY0vzmYM
Back To Top PM Quote Reply  

 Posted: Tue Jun 30th, 2009 11:22 pm
  PM Quote Reply
4th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 I checked the Bosch washer today and the symptom is a little different than I was told. The machine does spin,
but by the end of the cycle the clothes come out wet
(even though they have spun many times)?
I am leaning toward the control board as the problem, since everything seems to work O.K. except for spinning
enough or at proper speed.
Back To Top PM Quote Reply

 Posted: Wed Jul 1st, 2009 03:39 am
  PM Quote Reply
5th Post
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology


Joined: Sat Sep 24th, 2005
Location: Milwaukee, Wisconsin USA
Posts: 9067
Flavorite Brew: Indian Head. Black & White
Status: 
Offline
 and how is the Pump ?



____________________

RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw

my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA

Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
Back To Top PM Quote Reply  

 Posted: Wed Jul 1st, 2009 03:40 am
  PM Quote Reply
6th Post
Samurai Appliance Repair Man
Fermented Grand Master of Appliantology


Joined: Mon Mar 21st, 2005
Location: Otterville, USA
Posts: 12950
Flavorite Brew: Kirin Ichiban
Status: 
Offline
 Does it get up to high speed spin? Or just the fast tumble?

The manuals Reg sent you are the ones that even Bosch calls out for that model. Guess the differences are not significant enough to merit a whole new, expensive-to-produce manual.

EDIT: Added "not" to the last sentance. Changed the whole meaning!

Last edited on Wed Jul 1st, 2009 04:24 pm by Samurai Appliance Repair Man



____________________
Links: Parts | FAQs | Store | Beer | Home
Back To Top PM Quote Reply

 Posted: Wed Jul 1st, 2009 05:12 am
  PM Quote Reply
7th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 Thanks for the replies - I suspect the pump is O.K. because machine pumps water out fine - pulled the d/c line
out of the pipe and flow seems fine. Also checked for debris in the sump - it was clear.
The unit actually gets up to high speed spin for only a few minutes during a one hour cycle - otherwise it is turning much slower.
Note that whenever my three test towels came out wet - I set machine on high speed manual spin, and it worked fine.
The towels came out as you would expect.
Back To Top PM Quote Reply  

 Posted: Wed Jul 1st, 2009 04:25 pm
  PM Quote Reply
8th Post
Samurai Appliance Repair Man
Fermented Grand Master of Appliantology


Joined: Mon Mar 21st, 2005
Location: Otterville, USA
Posts: 12950
Flavorite Brew: Kirin Ichiban
Status: 
Offline
 How's floor stability during spin? If the floor gives and the washer starts shaking during spin, it'll ramp down the spin speed.



____________________
Links: Parts | FAQs | Store | Beer | Home
Back To Top PM Quote Reply

 Posted: Wed Jul 1st, 2009 05:09 pm
  PM Quote Reply
9th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 The machine is on the second floor, but it does a good job
whenever it spins (even at the 1000RPM). Smooth operation
on the flooring every time. Thanks for this idea, because I have seen front loaders at friends houses that shake
rattle and roll every time. GG
Back To Top PM Quote Reply  

 Posted: Wed Jul 1st, 2009 05:10 pm
  PM Quote Reply
10th Post
Samurai Appliance Repair Man
Fermented Grand Master of Appliantology


Joined: Mon Mar 21st, 2005
Location: Otterville, USA
Posts: 12950
Flavorite Brew: Kirin Ichiban
Status: 
Offline
 Have you gone into service mode and activated spin mode? Any difference?



____________________
Links: Parts | FAQs | Store | Beer | Home
Back To Top PM Quote Reply

 Posted: Wed Jul 1st, 2009 10:41 pm
  PM Quote Reply
11th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 Very good idea, except the Bosch manual that Reg sent me
is not for this machine. It is for two other model numbers,
and each one of them requires you to go through different
steps to go to service mode and for retreiving trouble codes?
Back To Top PM Quote Reply  

 Posted: Thu Jul 2nd, 2009 12:04 am
  PM Quote Reply
12th Post
Samurai Appliance Repair Man
Fermented Grand Master of Appliantology


Joined: Mon Mar 21st, 2005
Location: Otterville, USA
Posts: 12950
Flavorite Brew: Kirin Ichiban
Status: 
Offline
 Samurai Appliance Repair Man wrote:
The manuals Reg sent you are the ones that even Bosch calls out for that model. Guess the differences are not significant enough to merit a whole new, expensive-to-produce manual.

The control panel on the 22 looks like the same panel as the 32. Use the procedure for the 32 starting on page 63 of the manual.



____________________
Links: Parts | FAQs | Store | Beer | Home
Back To Top PM Quote Reply

 Posted: Thu Jul 2nd, 2009 02:29 am
  PM Quote Reply
13th Post
denrayr
Sublime Master of Appliantology


Joined: Wed Mar 30th, 2005
Location: St George, Utah USA
Posts: 891
Flavorite Brew: diet coke
Status: 
Offline
 many of the Bosch machines will store trouble codes in memory so you can retrieve them in service mode.



____________________
RedRock Appliance Service
435-773-7838
http://www.redrockrepair.com
Serving St George and Southern Utah
Back To Top PM Quote Reply  

 Posted: Thu Jul 2nd, 2009 05:19 am
  PM Quote Reply
14th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 Thanks for the info - will try the procedure starting on
page 63 of the manual and see what happens?
Many thanks for the responses, GG
Back To Top PM Quote Reply

 Posted: Fri Jul 3rd, 2009 04:40 am
  PM Quote Reply
15th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 I checked the Bosch unit today and the trouble codes are
E:20 (spinning aborted due to unbalanced load)
d:08 (motor speed sensor failed)
d:10 (power limiter switch off)

Please note that when I am scrolling through the trouble
codes it jumps from E:24 to d:08, then it skips d:09, then
skips d:11 through d:18.

I ran the machine through all the tests, but the one that
did not turn out as manual stated was the "P:04" test.
The unit went through the test, but did not do the operations as stated in the manual. Unit did do the
50RPM and ended with the 1000RPM. Seemed as though the
unit just does the operations it wants to do.

Please, I would appreciate some help in interpreting the
results of these tests. I do not know where the speed sensor is located, but if it is on the motor control
board - I am still leaning towards this board?

Many thanks for your help,

GG
Back To Top PM Quote Reply  

 Posted: Fri Jul 3rd, 2009 05:52 am
  PM Quote Reply
16th Post
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology


Joined: Sat Sep 24th, 2005
Location: Milwaukee, Wisconsin USA
Posts: 9067
Flavorite Brew: Indian Head. Black & White
Status: 
Offline
 gergrff wrote: ... I do not know where the speed sensor is located...
a PDF search of the Service Manual for "speed sensor" shows it on the Motor on PDF page 44



____________________

RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw

my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA

Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
Back To Top PM Quote Reply

 Posted: Fri Jul 3rd, 2009 11:07 am
  PM Quote Reply
17th Post
gergrff
Chief Apprentice Appliantologist
 

Joined: Mon Jun 29th, 2009
Location:  
Posts: 8
Flavorite Brew: Bud
Status: 
Offline
 Would someone that has experience with the Bosch machines
take a look at the results of my fault codes and testing
and give an educated opinion as to what direction I should
go with parts. This would be appreciated very much.

GG
Back To Top PM Quote Reply  

Current time is 09:12 pm  
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Bosch washer WFMC2201UC Top

FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home

Your Sometimes-Lucid Host:
ApplianceGuru.com: The Samurai Appliance Repair Forums Home
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly, spilling my steaming entrails onto your floor."

Appliance theme by Di @ Data 1 Systems
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.8183 seconds (14% database + 86% PHP). 28 queries executed.