|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > he3t control panel dead model# 110.4292220 what part is control board? |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 |
|
|
|||||||||||||
| he3t control panel dead model# 110.4292220 what part is control board? | Rate Topic |
| Author | Post |
|---|
| Posted: Thu Mar 5th, 2009 01:41 pm |
|
1st Post |
|
bcippola Sublime Master of Appliantology 
|
he3t control panel dead model# 110.4292220 what part is control board? Customer lives an hr away and I want to have some solutions on truck. Control panel will not light up. Machine is dead and outlet is fine. Any thoughts on which board and part# Thanks BC Last edited on Thu Mar 5th, 2009 01:42 pm by bcippola |
||||||||||||||
| |||||||||||||||
| Posted: Thu Mar 5th, 2009 03:05 pm |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
The CCUs have been an Achilles Heel in this otherwise decent machine. But that's an expensive part to carry on the truck just to have on hand. But if you're getting voltage to the CCU and not display, then it really comes down to the CCU itself is bad or the touchpanel is bad. Not seen many touchpanels go bad but I've replaced lots of CCUs. And you should edumucate your customer on the folly of wet appliances using electronics and the necessity of using surge suppressors with electronified appliances.
____________________  If I've helped you with your repair, please consider supporting my flavorite charity: http://beer.fixitnow.com |
|||||||||||||
| ||||||||||||||
| Posted: Thu Mar 5th, 2009 03:09 pm |
|
3rd Post |
|
bcippola Sublime Master of Appliantology
|
so would this be a ccu? to many controls listed on these puppies. 285924
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Mar 5th, 2009 04:26 pm |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
bcippola wrote: so would this be a ccu? to many controls listed on these puppies. yes
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Tue Mar 10th, 2009 12:13 pm |
|
5th Post |
|
bcippola Sublime Master of Appliantology
|
Thanks again. As tech sheet stated I plugged in and no click heard at CCU so replaced and machine was fixed. BC
|
||||||||||||||
| |||||||||||||||
| Current time is 11:47 am | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > he3t control panel dead model# 110.4292220 what part is control board? | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com
