|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Appliance Service Manual Requests > Lower Drawer on Fisher Paykel DD602 |
|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Appliance Service Manual Requests > Lower Drawer on Fisher Paykel DD602 |
Konnichiwa and Welcome!Please register or watch this short screencast on how to get started here.
|
| Moderated by: Samurai Appliance Repair Man, RegUS_PatOff, Pegi |
|
|
|||||||||||||
| Lower Drawer on Fisher Paykel DD602 | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Oct 31st, 2009 08:39 pm |
|
1st Post |
|
RVChaser Apprentice Appliantologist
|
I recently removed the lower drawer on my Dishwasher to soak up water from a leak but now have a problem. When you open the lower drawer it "chirps" like normal but the LCD Handle display won't light along with the LED in the jet dry reservoir. I replaced the LED handle and the control board but still have the same result (I exchanged these parts with the top drawer and the top is still working fine). Any ideas?
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Nov 1st, 2009 12:24 pm |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
RVChaser wrote:I replaced the LED handle and the control board but still have the same result By LED handle, do mean the LED display badge? Which control board did you replace? The big (expensive) one?
____________________ Links: Parts | FAQs | Store | Beer | Home |
|||||||||||||
| ||||||||||||||
| Posted: Mon Nov 2nd, 2009 12:08 am |
|
3rd Post |
|
RVChaser Apprentice Appliantologist
|
The LCD display is what I meant, that doesn't light up at all. If I move it to the top drawer it lights up and works fine. Yes, I replaced the large control board (behind the front cover - white about 10"X 5" that has the various components plugged into it)
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Nov 2nd, 2009 01:39 am |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
If I remember something about the F&P Controller gets it's power through the Drain Pump. Check and compare Drain Pump resistances. Last edited on Mon Nov 2nd, 2009 01:45 am by RegUS_PatOff ____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Mon Nov 2nd, 2009 02:52 am |
|
5th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
RegUS_PatOff wrote:If I remember something about the F&P Controller gets it's power through the Drain Pump. That's for the FP washing machine. The badge on the dishdrawer is supplied by the control board. RV, only thing left is the wiring harness that connects the badge to the control board. Swap that out with the upper drawer, too. Attachment: DD602 Wiring Diagram.png (Downloaded 6 times)
____________________ Links: Parts | FAQs | Store | Beer | Home |
||||||||||||||
| |||||||||||||||
| Current time is 01:41 am | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Appliance Service Manual Requests > Lower Drawer on Fisher Paykel DD602 | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home
