| Author | Post |
|---|
njgreg
Apprentice Appliantologist
| Joined: | Tue Jun 10th, 2008 |
| Location: | |
| Posts: | 2 |
| Flavorite Brew: | miller |
| Status: |
Offline
|
|
Posted: Tue Jun 10th, 2008 23:35 |
|
I have a rheem rgda 060 blower fan is going out will not start without me pushing it and it gets so hot it shuts down. I have tried to cross reffrence to get a new motor but no such luck. It is a 1/6 hp 2 speed, ge motor.
can anyone help i can get more info if needed
thx
|
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 3861 |
| Flavorite Brew: | A & W in a frosted mug |
| Status: |
Offline
|
|
Posted: Wed Jun 11th, 2008 03:23 |
|
any part numbers or other numbers on the motor ?
... might that be a 3-phase *hp-1/6* rpm-1650* ?
Last edited on Wed Jun 11th, 2008 03:26 by RegUS_PatOff
____________________
RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my “Easter Seals Walk With Me” video production http://www.youtube.com/watch?v=-EBiLyYXMiA
After leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
|
dkpd1581
Sublime Master of Appliantology
| Joined: | Sun Dec 17th, 2006 |
| Location: | Atlanta, Georgia USA |
| Posts: | 132 |
| Flavorite Brew: | a free one |
| Status: |
Offline
|
|
Posted: Wed Jun 11th, 2008 10:56 |
|
Check to see if the capacitor is within 10% of the listed value. If the motor will not start without you turning it, the capacitor is a likely and cheaper suspect.
____________________
Take a minute to visit me at:
https://sites.google.com/site/dkpd1581/
|
dkpd1581
Sublime Master of Appliantology
| Joined: | Sun Dec 17th, 2006 |
| Location: | Atlanta, Georgia USA |
| Posts: | 132 |
| Flavorite Brew: | a free one |
| Status: |
Offline
|
|
Posted: Wed Jun 11th, 2008 10:58 |
|
Check to see if the capacitor is within 10% of the listed value. If the motor will not start without you turning it, the capacitor is a likely and cheaper suspect.
____________________
Take a minute to visit me at:
https://sites.google.com/site/dkpd1581/
|
njgreg
Apprentice Appliantologist
| Joined: | Tue Jun 10th, 2008 |
| Location: | |
| Posts: | 2 |
| Flavorite Brew: | miller |
| Status: |
Offline
|
|
Posted: Tue Jun 17th, 2008 21:34 |
|
sorry it took so long to get back been busy at work.
ok here is the info in the motor mod 5ksp29kk1722s part# 51-2182-01.
1/8 hp 2 speed. no cap on the motor.
|
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 3861 |
| Flavorite Brew: | A & W in a frosted mug |
| Status: |
Offline
|
|
Posted: Tue Jun 17th, 2008 21:55 |
|
MTG2806 MOT07715 MOT7715 5KSP29KK1722S 5KSP29KK1722 5KSP29HG7173 5KSP29HG7173S CAR4M434 CAR4UU83
Motor Info
"Capacitor Included Yes"
do you have model numbers on your old motor ?
Last edited on Tue Jun 17th, 2008 22:02 by RegUS_PatOff
____________________
RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my “Easter Seals Walk With Me” video production http://www.youtube.com/watch?v=-EBiLyYXMiA
After leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
|
TOPPS Appliance Service
Master Appliantologist
| Joined: | Fri Aug 29th, 2008 |
| Location: | Toledo, Ohio USA |
| Posts: | 27 |
| Flavorite Brew: | Iced Tea |
| Status: |
Offline
|
|
Posted: Mon Sep 1st, 2008 15:39 |
|
| cap should be located on squirrel cage [blower]
____________________
TOPPS Appliance Service
Toledo's "TOPP" Choice
http://www.TOPPSappliance-service.com
|
Current time is 16:08 | |
|
