|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Kitchen Aid Refrigerator |
|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Kitchen Aid Refrigerator |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 |
|
|
|||||||||||||
| Kitchen Aid Refrigerator | Rate Topic |
| Author | Post |
|---|
| Posted: Mon Sep 21st, 2009 04:54 pm |
|
1st Post |
|
ncc1701e Senior Apprentice Appliantologist
|
Kitchen Aid Refrigerator Side by Side M# KSRG 22FK SS03 S# SM 1926 886 Won't make ice. Ice maker does not have any ice in its mold. Ice maker fill pipe is not clogged with ice. The emitter led flashes twice then pauses then twice than pauses.... Is this a bad emitter/reciever board? thanks
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Sep 21st, 2009 05:17 pm |
|
2nd Post |
|
kdog Fellow, Academy of Sublime Masters of Appliantology 
|
Access the front of the I/M module and initiate a forced harvest by inserting a jumper between "T" and "H", once the pinion wheel advances a bit, remove the jumper- the I/M will turn a full revolution, and fill with a fresh charge of water near the end if all is well.
____________________ Can Ye spare some 'cutter me brutha ? http://web.me.com/zenzoidman/kdog/ |
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 14th, 2009 07:03 pm |
|
3rd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
for future reference Kdogs test wont work if your boards are bad unless you jump the right side boards black / black with white tracer wires. that will bypass the boards. you'll need to unplug the frige for 5 seconds to reset the programming...has a built in 40 min. delay
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Sun Nov 15th, 2009 10:49 am |
|
4th Post |
|
Chat_in_RI Sublime Master of Appliantology 
|
What position are the ejector fingers pointing? If they are down in the mold, you might have a broken module gear...
____________________ We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing. Mother Teresa |
|||||||||||||
| ||||||||||||||
| Current time is 03:05 am | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Kitchen Aid Refrigerator | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com
