To install a new t-stat in the proof oven, you need to remove the left top assembly..............Removing  the venturi sounds easy........

............  The venturi did not budge, I told the customer that something was going to break and he said O.K.  Order the parts but fixitnow..................

   I ordered  the parts before work started.

......................  The culprit ...............

I took a dremel tool with a cutter number 199 and cut down into the throat 3/8 of an inch....around in a circular pattern. The depth of the cutter.................... 

The spill tray removed

After removing the spill tray, the  fuel line is removed and nut is removed from the jet holder...I replace all of the burner parts, THEN, I replaced the oven thermostat.....

Re assemble all of the parts and  silicone the spill trays last, just in case you have to remove the tray to adjust the oven botton sub assy..........................

Last edited on Mon Apr 20th, 2009 12:08 am by RegUS_PatOff