| Author | Post |
|---|
xteife
Apprentice Appliantologist
| Joined: | Mon Sep 15th, 2008 |
| Location: | |
| Posts: | 5 |
| Flavorite Brew: | HopDevil |
| Status: |
Offline
|
|
Posted: Tue Sep 16th, 2008 13:44 |
|
Model is GSD6700. We had a power outage and possible surge the other night and now no lights on the panel light when you close and lock the door.
The start/reset button does nothing. I have already reset the breaker at the main, even left it off for more than 15 minutes, and checked for power at where the dishwasher is connected to the circuit. I took the control panel off and looked around, but saw nothing obviously fried or smelled anything burnt. Wasn't sure what else I could check.
Do these dishwashers have an internal breaker that can be reset somehow? I couldn't find anything about it online.
I'm guessing something got toasted. I lost a surge protector on the TV, etc too. What's the best way to isolate the part to possibly fix it?
I paid $110 for this thing used, so if it's going to cost more than that to fix on my own, tell me now and I'll just scrap it.
Thanks!
- Gerald
|
jambatt
Scholar of Advanced Appliantological Studies
| Joined: | Thu Jul 12th, 2007 |
| Location: | 23 Miles Offshore |
| Posts: | 500 |
| Flavorite Brew: | Heiniken |
| Status: |
Offline
|
|
Posted: Wed Sep 17th, 2008 03:34 |
|
Sounds like either control module fried or key pad is bad. Either one is around $80 to $90 each. Your call.
____________________
Don't take life too seriously, none of us get out alive !
|
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 3863 |
| Flavorite Brew: | A & W in a frosted mug |
| Status: |
Online
|
|
Posted: Wed Sep 17th, 2008 04:36 |
|
may be $59 depending on the full Model Numer .... GSD6700G02 ?
____________________
RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my “Easter Seals Walk With Me” video production http://www.youtube.com/watch?v=-EBiLyYXMiA
After leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
|
xteife
Apprentice Appliantologist
| Joined: | Mon Sep 15th, 2008 |
| Location: | |
| Posts: | 5 |
| Flavorite Brew: | HopDevil |
| Status: |
Offline
|
|
Posted: Wed Sep 17th, 2008 16:04 |
|
I knew that was coming...
GSD6700G00BB
Thank you.
|
xteife
Apprentice Appliantologist
| Joined: | Mon Sep 15th, 2008 |
| Location: | |
| Posts: | 5 |
| Flavorite Brew: | HopDevil |
| Status: |
Offline
|
|
Posted: Fri Sep 19th, 2008 13:14 |
|
So does the complete model # help any? Thoughts?
|
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 3863 |
| Flavorite Brew: | A & W in a frosted mug |
| Status: |
Online
|
|
Posted: Fri Sep 19th, 2008 13:54 |
|
Controller for that model is $ 90
click on picture
____________________
RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my “Easter Seals Walk With Me” video production http://www.youtube.com/watch?v=-EBiLyYXMiA
After leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
|
xteife
Apprentice Appliantologist
| Joined: | Mon Sep 15th, 2008 |
| Location: | |
| Posts: | 5 |
| Flavorite Brew: | HopDevil |
| Status: |
Offline
|
|
Posted: Fri Sep 19th, 2008 14:59 |
|
Thanks a lot. So is there a chance it's something else? Probably no return on that if it doesn't fix it, eh?
|
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 3863 |
| Flavorite Brew: | A & W in a frosted mug |
| Status: |
Online
|
|
Posted: Fri Sep 19th, 2008 15:05 |
|
Any part ordered from RepairClinic.com can be returned (in original condition) within 30 days for a refund.
(less shipping)
____________________
RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my “Easter Seals Walk With Me” video production http://www.youtube.com/watch?v=-EBiLyYXMiA
After leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
|
xteife
Apprentice Appliantologist
| Joined: | Mon Sep 15th, 2008 |
| Location: | |
| Posts: | 5 |
| Flavorite Brew: | HopDevil |
| Status: |
Offline
|
|
Posted: Sat Oct 4th, 2008 01:42 |
|
I just wanted to thank all of you. The new controller did the trick!
And, for anyone else wondering about this in the future, one sure way to tell if your controller got fried is to take it out and remove the cover to view the electronics. Part of the board and some of the capacitors(?) were black.
- Gerald
|
Current time is 17:17 | |
|
