|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Frigidaire FRS26ZPH ice dispenser door sticks.... |
Konnichiwa and Welcome!Please register or watch this short screencast on how to get started here.
|
| Moderated by: RegUS_PatOff, Pegi |
|
|
|||||||||||||
| Frigidaire FRS26ZPH ice dispenser door sticks.... | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Dec 16th, 2006 12:09 am |
|
1st Post |
|
Bhodi513 Senior Apprentice Appliantologist
|
Have a Frigidaire FRS26ZPH fridge and the ice dispenser "trap door" sticks. So basically the ice stacks up behind it makes a big pile but it doesn't have enough weight to open the "trap door". I can push it open with my finger just fine and it doesnt feel like its binding or broken. Any ideas on what to replace. I am assuming there is a spring in there or maybe some bushings that are offering some resistance. Thanks alot
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Dec 16th, 2006 05:28 am |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
Run that model number by me again, Hoss. Read this page to hepya with that.
____________________ Parts | FAQs | Store | Beer | Home |
|||||||||||||
| ||||||||||||||
| Posted: Sat Dec 16th, 2006 03:05 pm |
|
3rd Post |
|
Bhodi513 Senior Apprentice Appliantologist
|
I got the model number right. Frigidaire uses a letter and number identifier at the end to identify color and maybe features but on the fridge it is just FRS26ZPH. On thier website they have manuals for several different ones such as FRS26ZPHW3 and FRS26ZPHB2 but on the fridge itself it doesnt have those last two characters. Also all the manuals are the same for the variations. But if it helps, it's white with the digital buttons on the dispenser. Thanks alot
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Dec 16th, 2006 04:03 pm |
|
4th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
Ok, if you're not worried about it, neither am I. I am but a pez dispenser of information. Here's the breakdown diagram of your dispenser. Start right at item 35, the heat motor. If it's getting 120vac but not extending, then you need to replace it.
____________________ Parts | FAQs | Store | Beer | Home |
|||||||||||||
| ||||||||||||||
| Posted: Sun Dec 17th, 2006 02:57 am |
|
5th Post |
|
Bhodi513 Senior Apprentice Appliantologist
|
OHHHHHhhhhhh... So that little motor is actually supposed to open the "trap door". I thought the weight of incoming ice pushed it open. Sounds like thats exactly what is wrong with it. I will try to get in their and check it out. Thanks alot
|
||||||||||||||
| |||||||||||||||
| Current time is 12:44 pm | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Frigidaire FRS26ZPH ice dispenser door sticks.... | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home